Altera Arria 10 Avalon-MM DMA Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 133
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
Parameter Value Description
Size
N/A Qsys automatically calculates the required size after
you connect your components.
Device Identification Registers
Table 3-4: Device ID Registers
The following table lists the default values of the read-only Device ID registers. You can use the parameter editor
to change the values of these registers. Refer to Type 0 Configuration Space Registers for the layout of the Device
Identification registers.
Register Name Range Default Value Description
Vendor ID 16 bits 0x00000000
Sets the read-only value of the Vendor ID register. This
parameter can not be set to 0xFFFF per the PCI Express
Specification.
Address offset: 0x000.
Device ID 16 bits 0x00000001 Sets the read-only value of the Device ID register.
Address offset: 0x000.
Device ID
16 bits
0x00000000
Sets the read-only value of the Device ID register.
Address offset: 0x000.
Revision ID 8 bits 0x00000000 Sets the read-only value of the Revision ID register.
Address offset: 0x008.
Class code 24 bits 0x00000000 Sets the read-only value of the Class Code register.
Address offset: 0x008.
Subsystem
Vendor ID
16 bits 0x00000000 Sets the read-only value of the Subsystem Vendor ID
register in the PCI Type 0 Configuration Space. This
parameter cannot be set to 0xFFFF per the PCI Express
Base Specification. This value is assigned by PCI-SIG to
the device manufacturer.
Address offset: 0x02C.
Subsystem
Device ID
16 bits 0x00000000 Sets the read-only value of the Subsystem Device ID
register in the PCI Type 0 Configuration Space.
Address offset: 0x02C
3-8
Device Identification Registers
UG-01145_avmm_dma
2015.05.14
Altera Corporation
Parameter Settings
Send Feedback
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 132 133

Comentarios a estos manuales

Sin comentarios