Altera Avalon Verification IP Suite Manual de usuario Pagina 91

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 224
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 90
set_enable_c_read()
set_enable_c_read()Prototype:
Verilog HDL: Boolean
VHDL: N.A.
Arguments:
voidReturns:
Enables a coverage group to test read transfers. This method is disabled when
reads are not supported.
Description:
Verilog HDLLanguage support:
set_enable_c_read_after_reset()
set_enable_c_read_after_reset()Prototype:
Verilog HDL: Boolean
VHDL: N.A.
Arguments:
voidReturns:
Enables a coverage group to test read transfers after reset.Description:
Verilog HDLLanguage support:
set_enable_c_read_burstcount()
set_enable_c_read_burstcount()Prototype:
Verilog HDL: Boolean
VHDL: N.A.
Arguments:
voidReturns:
Enables a coverage group tests different sizes of burstcount during read
burst transfers. Tests all possible values of burstcount. Disabled when either
burst transfers or reads are not supported, or the maximum burst is less than
1.
Description:
Verilog HDLLanguage support:
Altera Corporation
Avalon-MM Monitor
Send Feedback
7-19
set_enable_c_read()
Vista de pagina 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 223 224

Comentarios a estos manuales

Sin comentarios