Altera DE2-115 Manual de usuario descargar pdf (Pagina 85)

Note: execute DE2_115_NIOS_HOST_MOUSE_VGA\demo_batch\nios_host_mouse_vga.bat will

download .sof and .elf files.

Figure 6-4 illustrates the setup for this demonstration.

Figure 6-4 The setup for the USB paintbrush demonstration

Most USB applications and products operate as USB devices, rather than USB hosts. In this

demonstration, we show how the DE2-115 board can operate as a USB device that can be connected

to a host computer. As indicated in the block diagram in Figure 6-5, the Nios II processor is used to

communicate with the host computer via host port on the DE2-115 board’s Cypress CY7C67200

device.

After connecting the DE2-115 board to a USB port on the host computer, a software program has to

be executed on the Nios II processor to initialize the Cypress CY7C67200 chip. Once the software

program is successfully executed, the host computer will identify the new device in its USB device

list and asks for the associated driver; the device will be identified as a Terasic EZO USB. After

completion of the driver installation on the host computer, the next step is to run a software program

on the host computer called USB Controller.exe; this program communicates with the DE2-115

board.

Once a USB connection is established between PC and DE2-115 board, it is able to control and read

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 120 121

Sin comentarios

Altera DE2-115 Manual de usuario Pagina 85