Altera Virtual JTAG IP Core Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
In a real system, each instance of the Virtual JTAG megafunction works independently. In simulation,
multiple instances can work at the same time. For example, if you define a scan shift for Virtual JTAG
instance number 1 to happen at 3 ms and a scan shift for Virtual JTAG instance number 2 to happen at
the same time, the simulation works correctly.
If you are using the ModelSim-Altera simulator, the altera_mf.v and altera_mf.vhd libraries are provided
in precompiled form with the simulator.
The inputs and outputs of the Virtual JTAG megafunction during a typical IR scan shift operation are shown
in the figure below.
Figure 12: IR Shift Waveform
The figure below shows the inputs and outputs of the Virtual JTAG megafunction during a typical DR scan
shift operation.
Figure 13: DR Shift Waveform
Altera Corporation
Virtual JTAG Megafunction (sld_virtual_jtag)
Send Feedback
27
Simulation Support
UG-SLDVRTL
2014.03.19
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Comentarios a estos manuales

Sin comentarios