Altera Transceiver Signal Integrity Development Kit, Stra Manual de usuario descargar pdf (Pagina 15)

Chapter 2: Board Components 2–5

Board Overview

November 2011 Altera Corporation Transceiver Signal Integrity Development Kit,

Stratix IV GX Edition Reference Manual

J31, J33 GXB2 transmit channel 7 Transceiver GXB2 transmit channel 7 connected to SMA.

J35, J37 GXB2 receive channel 7 Transceiver GXB2 receive channel 7 connected to SMA.

J12 Fan power connector Power connector for 5-V DC fan sink.

J64 Fan control jumper

Jumper to select whether the fan is always on or automatically

controlled by the FPGA.

SW8 Reset push button Board reset push button.

SW9 CPU reset push button CPU reset push button.

Power

J1 Power Input Jack

14-V – 20-V DC female input power jack. Accepts 2.5-mm male

center-positive barrel from supplied 16-V DC power supply.

SW1 Power switch Switch to power on/off the board.

J2 0.9-V banana jack

Banana jack for supplying external 0.9-V V

power to the FPGA. Fuses

F1 and F2 must be removed prior to supplying external power to this

banana jack.

J3 VCCA banana jack

Banana jack for supplying external V

CCA

power to the FPGA. Fuse F3

must be removed prior to supplying external power to this banana jack.

J7 VCCR and VCCT banana jack

Banana jack for supplying external V

CCR

and V

CCT

power to the FPGA.

Fuse F84 must be removed prior to supplying external power to this

banana jack.

J9 VCCH banana jack

Banana jack for supplying external V

CCH

power to the FPGA. Fuse F6

must be removed prior to supplying external power to this banana jack.

J10 VCCL banana jack

Banana jack for supplying external V

CCL

power to the FPGA. Fuse F7

must be removed prior to supplying external power to this banana jack.

J4, J5 GND banana jack Banana jack connected to GND of the board.

F1, F2 10A fuse

Fuses for 0.9-V V

core of the FPGA. These fuses must be removed

when an external power is applied to this banana jack.

F3 2A fuse

Fuse for V

CCA

power of the FPGA. This fuse must be removed when an

external power is applied to this banana jack.

F6 5A fuse

Fuse for V

CCH

power of the FPGA. This fuse must be removed when an

external power is applied to this banana jack.

F7 2A fuse

Fuse for V

CCL

power of the FPGA. This fuse must be removed when an

external power is applied to this banana jack.

F84 5A fuse

Fuse for V

CCR

and V

CCT

power of the FPGA. This fuse must be removed

when an external power is applied to this banana jack.

U14 Power measurement ADC

Linear Technology LTC2418CGN 24-bit delta-sigma analog to digital

converter (ADC).

R3 0.001-Ω Rsense Sense resistor for measuring FPGA V

core power.

R11 0.009-Ω Rsense Sense resistor for measuring FPGA V

CCA

power.

R24 0.009-Ω Rsense Sense resistor for measuring FPGA V

CCH

power.

R25 0.009-Ω Rsense Sense resistor for measuring FPGA V

CCL

power.

R20 0.009-Ω Rsense Sense resistor for measuring FPGA V

CCR

and V

CCT

combined power.

Note to Table 2–1:

(1) Information for the board reference whose components on the engineering silicon board differ from the production silicon board are listed in

Table A–2 on page A–2.

Table 2–1. Stratix IV GX Transceiver Signal Integrity Development Board Components (Part 4 of 4)

(1)

Board Reference Type Description

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comentarios a estos manuales

Sin comentarios

Altera Transceiver Signal Integrity Development Kit, Stra Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Altera Transceiver Signal Integrity Development Kit, Stra