Altera Stratix V Advanced Systems Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Chapter 5: Board Test System 5–7
Using the Board Test System
February 2013 Altera Corporation Stratix V Advanced Systems Development Kit
User Guide
User LEDs
The User LEDs control displays the current state of the user LEDs. To toggle the board
LEDs, click the 0 to 7 buttons to toggle red or green LEDs, the All button, and the
graphical representation of the LEDs.
Push Button Switches
The read-only Push button switches (S8-S10) control displays the current state of the
board user push buttons. Press a push button on the board to see the graphical display
change accordingly.
The FMC/C2C Tab
The FMC/C2C tab allows you to perform loopback tests on the FMC XCVR and FMC
parallel ports, Chip-to-Chip (C2C) XCVR, C2C LVDS, and C2C single-ended
loopback. FPGA 1 is configured with a design for FMC testing and C2C testing.
FPGA2 is configured with a design for C2C testing.
1 Altera recommends loading the C2C loopback design without Nios configured to
FPGA2. Configuring the FPGAs through the BTS GUI handles this by default.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Comentarios a estos manuales

Sin comentarios