Altera Nios II Embedded Evaluation Kit Cyclone III Editio Manual de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
Altera Corporation B–8
July 2010 Nios II Embedded Evaluation Kit, Cyclone III Edition
Create a BSP
The first thing that’s needed to build the software project is a board
support package (BSP). To create a BSP perform these steps:
1. Open a Nios II Command Shell.
2. Change to the directory:
<Install Directory>
examples/
application_selector/
software_examples/
bsp/
hal_application_selector
3. Run the command ./create_this_bsp.
Build the project
The next step is to build the Application Selector project. To build the
project, perform these steps:
1. In the Nios II Command Shell, change to the directory:
<Install Directory>
examples/
application_selector/
software_examples/
app/
application_selector
2. Run the command make all.
1 For more information about BSPs and the Nios II Software
Build Tools, refer to the Getting Started from the Command
Line chapter in volume 2 of the Nios II Software Developer’s
Handbook.
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

Comentarios a estos manuales

Sin comentarios