Altera Arria 10 Avalon-MM Manual de usuario Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 212
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
Table 5-3: Avalon-MM TX Slave Interface Signals
Signal Name Direction Description
TxsChipSelect_i
Input The system interconnect fabric asserts this signal to
select the TX slave port.
TxsRead_i
Input Read request asserted by the system interconnect fabric
to request a read.
TxsWrite_i
Input Write request asserted by the system interconnect fabric
to request a write.
TxsWriteData[127 or 63:0]
Input Write data sent by the external Avalon-MM master to
the TX slave port.
TxsBurstCount[6 or 5:0]
Input Asserted by the system interconnect fabric indicating
the amount of data requested. The count unit is the
amount of data that is transferred in a single cycle, that
is, the width of the bus. The burst count is limited to 512
bytes.
TxsAddress_i[<w>-1:0]
Input Address of the read or write request from the external
Avalon-MM master. This address translates to 64-bit or
32-bit PCI Express addresses based on the translation
table. The <w> value is determined when the system is
created.
5-6
64- or 128-Bit Bursting TX Avalon-MM Slave Signals
UG-01145_avmm
2015.05.14
Altera Corporation
64- or 128-Bit Avalon-MM Interface to the Application Layer
Send Feedback
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 211 212

Comentarios a estos manuales

Sin comentarios