Altera DSP Development Kit, Stratix & Stratix Profess Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 26
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
2–10 Development Kit Version 1.3.0 Altera Corporation
DSP Development Kit, Stratix & Stratix Professional Edition Getting Started User Guide December 2004
Connect the Cables to the Board & PC
Figure 2–2. Connect the ByteBlasterMV Cable to the EP1S25 or EP1S80 Board
RS-232 Cable
You can optionally attach the serial cable to one of the serial ports on your
PC and to the RS-232 male connector at J8 on the board. See Figure 2–3.
1 For the Stratix DSP board to communicate with the PC via the
RS-232 cable, RS-232 interface logic must be implemented in the
Altera device on the board.
For the EP1S25 development board, the J8 connector is located
on the bottom, right-hand side of the board. For the EP1S80
development board, the J8 connector is located on the bottom,
left-hand side of the board.
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26

Comentarios a estos manuales

Sin comentarios